Under the premise of ensuring the quality of the parts, the mold life refers to the number of mold operations that can form parts, and the mold life is a compre...
During the injection molding process, a large amount of melt will not seep out of the vent hole, because the melt will cool and solidify there, thereby blocking...
2022-06
The main steps of trial mode:Because degraded rubber and miscellaneous materials may clog the mold, to prevent degraded rubber or miscellaneous materials from b...
2022-06
The cutting process of mold processing should be divided into at least three processes: roughing, semi-finishing and finishing, and sometimes even super-finishi...
2022-06
According to the statistics of the China Mould Industry Association, in 2018, China's mold exports were US$6.085 billion, an increase of 10.8% over the previous...
2022-06
The design of the runner of the feed inlet is focused on The feed port should be located in the thicker part of the product to ensure smooth and complete mold f...
2022-06
Provide free proofing service
0755-23244922 / 23400063
7*24 full service
Video live demonstration
Phone: 18682296751
Fax: 0755-23249890
Email: Market@godemold.com / GDM@godemold.com
ShenZhen Add: No7 floor,Building C,IdeeMonto Park, MaTian street, GuangMing district,ShenZhen,China. 518106
DongGuan Add: 1-2 floor,No4 building,YuYunSmart Industrial Park,10 DaKan XiLong Road HuangJiang town, DongGuan, China. 523750
Molds
Products
About Us
Support
Technology Center
Manufacturing Center
News
English